Skip to content

03 / REPEATABILITY

Plan a repeatable print batch

Track what changes between a one-off and a repeatable run of parts.

Separate unit time from batch time

Record which setup jobs happen once, such as preparing an export, and which happen for every plate. Do the same for inspection and packaging.

Keep yield visible

A cheap plan for one successful plate may be a poor fit for a delivery date if it has unreliable yield. Compare usable parts per hour alongside expected cost.

Keep a record you can revisit

Export assumptions and totals for the same quantity, then record actual outcomes after the run. Adjust the next estimate from evidence, not from the previous forecast alone.

Worked example: 25 parts on a 12-part grid

The plate planner starts with an illustrative 220 × 220 mm bed, a 60 × 40 mm sliced footprint, 5 mm between parts and 10 mm at each edge. The better uniform grid fits 12 parts, so a target of 25 good parts requires at least three runs before any failures. The final plate is only partly occupied. This is not an optimal nesting result and does not include printhead collision clearance for sequential printing. Check the arrangement in the actual slicer, including brim, support and machine-specific excluded areas.

Keep first-run work out of repeated unit assumptions

Preparing the model, choosing a profile and checking the first part may happen once, while plate cleaning, removal and inspection repeat. Decide which cost model you are using before multiplying a unit estimate. If each attempt includes its own handling time, do not also add the same time as a separate plate task. The current calculator is an explicit per-attempt comparison. A production worksheet can retain additional once-only tasks alongside it without pretending they are automatically represented in its result.

Use failures as evidence with a denominator

A note that says “two failed” is incomplete without the attempted quantity and what was rejected. Record usable units, attempted units and the relevant reason, such as a fit problem identified at inspection. A failed plate may affect several parts at once, so independent per-part failure assumptions may be a poor fit for some jobs. Keep the limitation visible and use your own comparable history when estimating the next run. The break-even worksheet explores what a quote can absorb; it does not promise a particular yield or delivery date.

Common questions

Is the plate planner a complete slicer or nesting optimiser?

No. It compares two uniform rectangular grid orientations and clearances. Check the final arrangement and toolpaths in your slicer.

Does the failure allowance guarantee enough good parts?

No. It is an editable expectation. Actual failures and correlated plate losses can differ from the estimate.

Sources and scope

Original planning guidance and labelled worked examples. These primary references support the technical context; our exercises and editable assumptions are not presented as official recommendations from these organisations.

Editorial standards · Report a correction

What to try next

All topic guides

Filament Workbench

Your privacy choices

With your permission, we use Google Analytics to understand page visits. Google Analytics stays unloaded without consent. Articles, calculators and 3D views work with either choice.

Optional analytics only

Advertising and personalisation stay off. We send the canonical page address without query strings or fragments, and no calculator entries. Your choice applies only to this site for up to 180 days.

Change your choice here anytime. Withdrawing consent reloads the page to unload Google code; save any open tool inputs first. Privacy and storage details