Skip to content

GEOMETRY DESK / ORIGINAL MODEL 001

Understand the part
before the print.

A dimensioned, original electronics-enclosure study. Look inside the 2.4 mm shell, find the screw bosses and inspect the vented lid. This is an educational model, not tested product engineering or a manufacturing-ready file.

Choose what to inspect

The model loads from this website only after you choose to open it.

A wall is a toolpath decision.

The outer footprint is 100 × 70 mm; the wall is 2.4 mm in this illustrative design. Compare that with your chosen extrusion width and inspect the resulting perimeter paths in your slicer. Geometry alone does not select a valid wall count.

Static diagram: vented lid, perimeter wall, base and four screw bosses.

Wall & base

The shell and floor are 2.4 mm in the study. Measure the sliced material including supports. A volume estimate does not account for infill, perimeters, purge or failed attempts.

Screw bosses

Four posts have a 3.2 mm modelled bore. Fit, fastener choice and durability require independent design work and a physical trial. No clearance or strength is certified here.

Lid & vents

The separate lid includes seven rounded slots. Lift it to inspect the inside; rotate to examine its underside. Use the slicer to choose orientation and assess overhangs.

Original asset and limits

Created for Filament Workbench from explicit geometry: 100 × 70 × 32.4 mm assembled, 6 mm outer corner radius, 2.4 mm shell. The assembled and exploded GLBs are approximately 345 KB each; the viewer loads on request and never auto-rotates. The static diagram and this description work without WebGL. Original model and generation source: CC BY 4.0, Orvus Limited / Filament Workbench.

For real print preparation, compare the PrusaSlicer layer and perimeter guidance with your material and machine. This study is not an electrical enclosure safety assessment.

Plan the full sliced footprint ↗ · Compare costs ↗

Filament Workbench

Your privacy choices

With your permission, we use Google Analytics to understand page visits. Google Analytics stays unloaded without consent. Articles, calculators and 3D views work with either choice.

Optional analytics only

Advertising and personalisation stay off. We send the canonical page address without query strings or fragments, and no calculator entries. Your choice applies only to this site for up to 180 days.

Change your choice here anytime. Withdrawing consent reloads the page to unload Google code; save any open tool inputs first. Privacy and storage details